Choose an application

• Reference Manager
• EndNote
• RefWorks (Direct export to RefWorks)

The principle of sustainability should be strictly connected with safety, since both aim to conserve resources: in the case of sustainability, the resources are typically thought of as environmental, while in the case of safety, the resources are basically human. In spite of this common ground, discussions on sustainability usually give insufficient attention to safety. In the last years the EU has made large investments to increase the energy efficiency of the existing building stock, paving the way for a low-carbon future; however, less effort has been made to enhance its seismic resilience. Therefore, the safety and, consequently, the sustainability of towns situated in earthquake-prone countries remain inadequate. In such countries, energy renovation actions should be combined with seismic retrofitting. However, a number of barriers considerably limit the real possibility of extensively undertaking combined retrofit actions, especially for multi-owner housing and high-rise buildings. These barriers are of different kinds: technical (e.g., unfeasibility and/or ineffectiveness of conventional retrofit solutions), financial (e.g., high renovation costs, insufficient incentives/subsidies), organizational (e.g., occupants' disruption and relocation, renovation consensus by condominium ownerships), and cultural/social (insufficient information and skills, lack of adequate policy measures for promoting renovation actions). This book aims to overcome these barriers and to bridge the gap between sustainability and safety, so to conserve both human and environmental resources.

multifunctional component --- seismic reinforcement --- Eastern Sicily --- urban planning --- U-value --- pre-diagnostic process --- optimization --- safety --- energy efficiency --- Annex 56 --- green infrastructure --- energy retrofitting --- apartment blocks --- seismic vulnerability assessment --- energy performances --- combined interventions --- damage mechanisms --- sustainability --- cultural value --- risk analysis --- parametric design --- seismic retrofit --- energy retrofit --- building envelope --- high-rise building --- technological design --- cost-effective --- seismic improvement --- energy savings --- policy measures --- historical masonry --- historic urban fabric --- seismic analysis --- historic massive envelope --- masonry building aggregates --- innovative product --- façade --- exoskeleton --- seismic retrofitting --- building rehabilitation --- nearly zero-energy buildings (nZEB) --- dry-assembly system --- BIPV (Building Integrated Photovoltaic) --- translucent panel --- seismic renovation --- energy performance --- architectural image --- seismic and energy retrofit --- historical building --- ecosystem services --- mechanical resistance --- sustainability and aesthetics

Choose an application

• Reference Manager
• EndNote
• RefWorks (Direct export to RefWorks)

This book collects research activities focused on the development of new processes to replace obsolete practices that are often highly invasive, unsustainable, and socially unacceptable.Taking inspiration from real problems and the need to face real cases of contamination or prevent potentially harmful situations, the development and optimization of ‘smart’ solutions, i.e., sustainable not only from an environmental point of view but also economically, are discussed in order to encourage, as much as possible, their actual implementation.

Environmental science, engineering & technology --- water resources --- virtual water trade --- input-output method --- Gansu province --- ecological consumption --- influencing factors --- panel regressions --- ecological footprint --- innovative envelope --- building components --- green roofs --- indoor comfort --- energy consumption --- building modelling --- simulation models --- chitosan --- chromium --- heavy metals --- adsorption --- kinetics --- low-cost adsorbent --- tannery --- ion exchange --- nanobubbles --- contaminated soil --- electrokinetic --- in situ --- remediation --- Spinacia oleracea microbiota --- electrochemically activated solution --- peroxyacetic acid --- sanitization --- 16s rRNA pyrosequencing --- amplicon sequence variants --- alpha diversity --- bacterial community composition --- sedimentation --- drag --- fractal aggregates --- shear-thinning --- non-Newtonian fluids --- suspensions --- numerical simulations --- environmental impact --- waste management --- industrial production --- investment project --- risk evaluation --- multicriterial approach --- production planning --- carbon regulation --- reconditioning --- green logistics --- optimization --- drinking water treatment plant --- advection–diffusion–reaction --- chlorine dosage --- simulator validation --- industrial application --- biodegradation --- dehalogenase-producing bacteria --- haloalkanoic acids --- trichloroacetic acid --- 16S rRNA --- Lysinibacillus --- building energy efficiency --- European environmental brands --- tourism sector --- agritourism --- nearly zero energy buildings (nZEB) --- submerged marine debris --- economic valuation --- contingent valuation --- economic benefit --- willingness to pay --- proecological behavior --- circular economy --- environmental management --- survey --- nonparametric methods --- serpentinite --- magnesium oxide --- calcination --- particle size distribution --- specific surface area --- magnesium potassium phosphate matrix --- radioactive waste --- immobilization --- hydrolytic stability --- strength --- pH-neutral electrochemically activated solution --- total bacterial count --- Salmonella Enteritidis --- egg cuticle integrity --- soil remediation --- soil contamination --- greenhouse --- phytoextraction --- mobilizing agents --- photosynthetic efficiency --- photovoltaics --- luminescent dyes --- energy savings --- sustainability --- cork–graphite electrode --- electrochemistry --- lead --- environmental application --- environmental pollution and remediation --- hazardous waste management --- soil and water reclamation --- nanomaterials --- sustainable processes

Choose an application

• Reference Manager
• EndNote
• RefWorks (Direct export to RefWorks)

This Special Issue, entitled “Non-Destructive Testing in Civil Engineering”, aims to present to interested researchers and engineers the latest achievements in the field of new research methods, as well as the original results of scientific research carried out with their use—not only in laboratory conditions but also in selected case studies. The articles published in this Special Issue are theoretical–experimental and experimental, and also show the practical nature of the research. They are grouped by topic, and the main content of each article is briefly discussed for your convenience. These articles extend the knowledge in the field of non-destructive testing in civil engineering with regard to new and improved non-destructive testing (NDT) methods, their complementary application, and also the analysis of their results—including the use of sophisticated mathematical algorithms and artificial intelligence, as well as the diagnostics of materials, components, structures, entire buildings, and interesting case studies.

conveyor belt --- climatic factors --- thermal shocks --- mechanical properties --- applied geophysics --- urban geophysics --- Eleftheria Square --- ERT --- probability-based ERT inversion (PERTI) method --- GPR --- EMI --- impact-echo --- tooth gear impactor --- contact duration --- delamination --- rapid scanning --- non-destructive testing --- concrete slab --- building defects --- building diagnosis --- building envelope --- building inspection system --- urgency of repair --- historic buildings --- brick walls --- nondestructive testing --- artificial neural networks --- Nearly Zero Energy Buildings (NZEB) --- passive house (PH) --- heat flux meter (HFM) --- quantitative infrared thermography (QIRT) --- building thermal performance --- U-value --- Mediterranean climate --- electrical resistivity --- electrical impedance --- concrete --- mortar --- measurement accuracy --- ultrasonic elastography --- underground detection --- soil inspection --- underwater acoustics --- non-destructive test --- monitoring --- housing --- buildings --- façade --- thermal transmittance --- HFM method --- infrared thermography --- solar loading thermography --- lock-in thermography --- passive thermography --- thermal thickness --- thermal effusivity --- infrastructure --- NDT --- onsite X-ray bridge inspection --- 950 keV/3.95 MeV X-ray sources --- PC bridge --- unfilled grout --- quantitative evaluation of stage of unfilled grout --- step-heating thermography --- active thermography --- linear effusivity fit --- ground-penetrating radar --- signal features --- material moisture --- classification --- machine learning --- moisture measurements --- building floors --- civil engineering --- crack measurement --- image processing --- high resolution --- working distance --- crack width --- visual inspection --- structure state assessment --- ground sample distance (GSD) --- sonic resonant method --- impulse excitation technique --- resonant frequency --- steel fiber reinforced concrete --- fiber orientation --- micro-computed tomography --- ultrasound --- spectral induced polarization --- small force --- load --- instrumental signal --- two-point bending test --- strain gauge --- calibration equation --- n/a --- façade

Choose an application

• Reference Manager
• EndNote
• RefWorks (Direct export to RefWorks)

This Special Issue, entitled “Non-Destructive Testing in Civil Engineering”, aims to present to interested researchers and engineers the latest achievements in the field of new research methods, as well as the original results of scientific research carried out with their use—not only in laboratory conditions but also in selected case studies. The articles published in this Special Issue are theoretical–experimental and experimental, and also show the practical nature of the research. They are grouped by topic, and the main content of each article is briefly discussed for your convenience. These articles extend the knowledge in the field of non-destructive testing in civil engineering with regard to new and improved non-destructive testing (NDT) methods, their complementary application, and also the analysis of their results—including the use of sophisticated mathematical algorithms and artificial intelligence, as well as the diagnostics of materials, components, structures, entire buildings, and interesting case studies.

Technology: general issues --- History of engineering & technology --- conveyor belt --- climatic factors --- thermal shocks --- mechanical properties --- applied geophysics --- urban geophysics --- Eleftheria Square --- ERT --- probability-based ERT inversion (PERTI) method --- GPR --- EMI --- impact-echo --- tooth gear impactor --- contact duration --- delamination --- rapid scanning --- non-destructive testing --- concrete slab --- building defects --- building diagnosis --- building envelope --- building inspection system --- urgency of repair --- historic buildings --- brick walls --- nondestructive testing --- artificial neural networks --- Nearly Zero Energy Buildings (NZEB) --- passive house (PH) --- heat flux meter (HFM) --- quantitative infrared thermography (QIRT) --- building thermal performance --- U-value --- Mediterranean climate --- electrical resistivity --- electrical impedance --- concrete --- mortar --- measurement accuracy --- ultrasonic elastography --- underground detection --- soil inspection --- underwater acoustics --- non-destructive test --- monitoring --- housing --- buildings --- façade --- thermal transmittance --- HFM method --- infrared thermography --- solar loading thermography --- lock-in thermography --- passive thermography --- thermal thickness --- thermal effusivity --- infrastructure --- NDT --- onsite X-ray bridge inspection --- 950 keV/3.95 MeV X-ray sources --- PC bridge --- unfilled grout --- quantitative evaluation of stage of unfilled grout --- step-heating thermography --- active thermography --- linear effusivity fit --- ground-penetrating radar --- signal features --- material moisture --- classification --- machine learning --- moisture measurements --- building floors --- civil engineering --- crack measurement --- image processing --- high resolution --- working distance --- crack width --- visual inspection --- structure state assessment --- ground sample distance (GSD) --- sonic resonant method --- impulse excitation technique --- resonant frequency --- steel fiber reinforced concrete --- fiber orientation --- micro-computed tomography --- ultrasound --- spectral induced polarization --- small force --- load --- instrumental signal --- two-point bending test --- strain gauge --- calibration equation